Building Bookcase Headboard Queen Size – Having bookcase in headboard can eliminate the need for night stands and gives you a place to put the book when we has finished to read. A double header with a single platform held 7 1/2 square feet of material. This is a suitable project for intermediate or novice woodworkers with access to more experienced advice.
To building bookcase headboard queen size, the first, Sand all sides of the wood, once with coarse grit and once with fine grit sandpaper. Apply a coat of stain to all sides of their timber. Establish a board of 48 inches and a 58 – inch board in an L, with the end of the table 58 inches adjacent to the face of board 48 inches. Glue in place with wood glue. Drive three finish nails spaced evenly across the face of the plate 48 inches and in the center of the edge of the table 58 inches. Set the second table 48 inches against the open end of the table 58 inches, forming a C.
To building bookcase headboard queen size, Slide the second table of 58 inches between the 48 – inch boards parallel and 12 inches from the other plate of 58 inches. Glue, nails dry and both ends as before. Support for half its bookcase joining the 36 – inch plank half of the bottom plank lowest 58 inches. Glue, nails dry as before. Configure your resume wooden frame with edges flush with the edges of the frame. Glue and let dry. Once dry, drive a finishing nail in each corner and four nails evenly spaced along one side and the top edges.
12 Building Bookcase Headboard Queen Size Photos